Diamond Blades are normally stocked in 12″, 14″, and 16″
in ALL of the below lines in various quality levels

All Diamond Blades 12″ and larger are equipped with a 1″ arbor,
center bushings are available at no charge if 20mm, 7/8″, or 5/8″ are needed

Abrasive or Carborundum Blades are Stocked in 12″ and 14″ for asphalt and concrete and 16″ for ductile iron

We carry metal cutting abrasive blades from 4.5″ for a hand grinder through 14″ for your power cutter and a number of sizes in between

Core Bits are normally stocked from
1″ thorough 4″ Diameter in 1/2″ incriments, and 5″ through 8″ diameter in 1″ incriments

Standard diamond core bits are 14″ deep and have either industry standard 1-1/4″x 7 or 5/8″x 11 thread depending on bit size.

These bits are unique in what they can do.  The bit head and thread cap unscrew from each other to allow mid tube sections to be threaded in.  This allows you to be able to create a single bit that can core as deep as you need it to.  We have had customers run these bits up to 40’ long.  Whether it’s a core sample from a special stone, or you’re in a situation where traditional core bit extensions just won’t work.  Look at these.

Whether its concrete your trying to grind that hump off or metal in need of a good cleaning we have cup and small diameter wheels for you.

Need a continuous rim blade for ceramic, porcelain, or glass tiles?  How about a 7 1/4″ blade for your circular saw?  Or a 4″ tuck point blade for repointing grout lines?

We keep a number of 4″-10″ blades on our wall in continuous rim, segmented, and turbo style blades.

We stock grinding stones for “wedge style” surface grinders in both course and fine grits. These block are sold by the piece so if you need 3 for a single head machine or 6 for a double its not a problem.