This specialized hand tool is used to firmly tuck carpet into tack strips, gullies, and crevices along stair edges, ensuring a tight, professional finish without damaging fibers. In essence, it’s the finishing tool that gives carpeted stairs their crisp, tight, and finished look.
Carpet Stapler, Electric
This durable power tacker is easy to use! The ruggedized electronic control board has an optical sensor that fires in response to a tough sliding trigger. It has a long, slender nose that easily parts yarns to get right down to the carpet’s backing. Takes Duo-Fast No. 5418 or No. 5415 staples, Shur-Fast (No. 619), or generic equivalents.
Tile Wet Saw, 18″-24″ Tile
These saws are designed with a 30″ throw allowing larger 24″ tiles to be cut on a diagonal and as with our smaller saws, these saw are equipped with a multi purpose blade to cut ceramic, porcelain, marble, glass and other tiles at no additional cost. All our tile saws run on a standard household… Read more »
Flooring Nailer, Pneumatic- 5/8in Bamboo
These are specially designed to make laying tongue-and-groove bamboo and engineered floor boards simple. You simply hold the nailer against the edge of the board and with a moderate whack on the plunger with the included nylon mallet, the nail is in, at the right angle, and the right depth, every time; and best of… Read more »
Tile Wet Saw, 12″-18″ Tile
These saws are designed with a 20″ throw allowing larger 12″-20″ tiles to be cut with ease and as with our smaller saws, are equipped with a multi purpose blade to cut ceramic, porcelain, marble, glass and other tiles at no additional cost. All our tile saws run on a standard household outlet, and must… Read more »
Tile Wet Saw, up to12″ Tile
12″ Wet Tile Saws create straight cuts on tiles up to 12″ in length or diagonals on up to 8.5″ tile . The saw needs to be run wet to function properly, and your rental includes use of the diamond blade. We have installed diamond blades that will cut both glass, ceramic or porcelain tiles, and marble… Read more »
Tile Dry Scribe
Do you have wall tile to cut? This may do the job for you with a little less mess. These cutters will only work on smooth top wall tile with no anti-skid coating.
VCT Tile Shear
VCT Tile Shears are designed to cut commercial vinyl composition tiles. They make a quick cut at your chosen angle to speed installation. Don’t forget after the installation….we rent commercial floor polishers, sell the pads, stripping and cleaning/shining chemicals to keep your floors looking brand new!
Linoleum Roller, Under Counter
Have a formica countertop you just installed or areas of linoleum that the full size rollers just won’t reach. This tool picks up the slack and lets you get everything rolled out properly for best adhesion.
Linoleum Roller, 75lb or 100lb
If you just installed new linoleum, VCT or carpet tiles you need to roll them out with a weighted floor roller for proper adhesion. These rollers come in 75, 100, or 150lbs. Check installation instructions of your material for the proper size.
Recent Comments